Aeroqual Perchloroethylene (C2Cl4) Sensor Head 0-200 ppm (PE)
The Perchloroethelyne (PERC) Sensor Head uses Gas Sensitive Semiconductor (GSS) technology to detect Perchloroethelyne from 0-200 ppm with 1.0 ppm resolution at up to +/- 5 ppm accuracy.
This Perchloroethelyne (PERC) Sensor Head uses Gas Sensitive Semiconductor (GSS) technology to detect Perchloroethelyne from 0-200 ppm at 1 ppm resolution with <±5 ppm accuracy (in concentrations from 0 - 50 ppm) or <± 10% accuracy (in concentrations from 50 - 200 ppm)
This sensor uses an active sensor technology with an internal fan to pull air across the GSS sensor at a specific flow rate for accurate gas detection.
This sensor head will be a direct fit onto any Series-200, Series-300, or Series-500 Aeroqual ozone monitor. This head can be purchased as an addition to your existing monitor, or with a new base unit. To purchase with a base unit see our Aeroqual ozone monitor page. If you currently have an Aeroqual ozone monitor this sensor will be a direct fit for your current monitor. The Series-200, Series-300, or Series-500 will automatically detect this as a 0-200 ppm PERC head and react accordingly.
Perchloroethylene sensor with Series-200 monitor
Perchloroethylene sensor with Series-300, 500 monitor
OSHA and Perchloroethylene regulations
EU Perchloroethyele regulations
View a brochure with specifications on the Series-200, 300, and 500.
Detailed Sensor Specifications for Aeroqual ambient sensors
There are two types of Aeroqual sensors, type 1 and type 2.
The type 1 is used with the S-200, S-300, S-500, and S-900 monitors.
The type 2 is calibrated specifically with fittings on the end allowing it to be used with the ENC enclosure and in the S930
Full list of technical information and specifications for all Aeroqual sensors
|Quickbooks Stock Level||0.000000|
|Quickbooks Stock Date Expected||2023-06-29 00:00:00|
|Call For Price||No|
|Sensor Type||GSS (Gas Sensitive Semiconductor)|
|Maximum Exposure||250 ppm|
|Monitor sensor fits||S-200 / S-300 / S-500, Series-900|
|Minimum Detection Limit||1 ppm|
|Accuracy||< +/- 5 ppm from 0-50 ppm; < +/- 10% from 50-200 ppm|
|Response Time||<5 s (T50)|
|Operational Temperature Range||0 to 40 C|
|Operational RH Range||10 to 90%|