Aeroqual VOC PID Sensor Head 0-30 ppm (PDL - VOC)

This Volatile Organic Compound (VOC) sensor head uses Photo Ionization Detector (PID) technology and will measure VOC's from 0-30 ppm at 0.01 ppm resolution while providing +/- 10% accuracy.

This sensor head will be a direct fit onto any Series-200, Series-300, or Series-500 Aeroqual ozone monitor.  This head can be purchased as an addition to your existing monitor, or with a new base unit.  To purchase with a base unit see our Aeroqual ozone monitor page.  If you currently have an Aeroqual ozone monitor this sensor will be a direct fit for your current monitor.  The Series-200, Series-300, or Series-500 will automatically detect this as a 0-30 ppm VOC head and react accordingly. 

Calibrated against isobutylene (other specific VOC calibrations are available on request).

Sensor information:

Aeroqual PID Sensor Response time and specific VOC response

Aeroqual PID sensor vs GSS sensor response

Other VOC Sensors Available from Aeroqual:

VOC 0-25 ppm - GSS sensor head

VOC 0-500 ppm - GSS sensor head

VOC 0-2,000 ppm - PID sensor head

 View a brochure with specifications on the Series-200, 300, and 500.

Detailed Sensor Specifications for Aeroqual ambient sensors

Click on image to expand

Sensor Type:

There are two types of Aeroqual sensors, type 1 and type 2. 
The type 1 is used with the S-200, S-300, S-500, and S-900 monitors. 
The type 2 is calibrated specifically with fittings on the end allowing it to be used with the ENC enclosure and in the S930

Full list of technical information and specifications for all Aeroqual sensors

VOC Information