We have been providing a product for some time that customers demand, but we have not properly advertised or placed on the website. This is the RAP-1 Remote Alarm Panel.
The RAP-1 is a simpler and lower cost version of the RAP-2 Alarm Panel. While the RAP-2 can work with any ozone sensor with relay outputs OR DC voltage output OR 4-20mA output, the RAP-1 will will work only with relay outputs.
When you need an audible and visual alarm with your ozone sensor the RAP-1 is a great option. The RAP-1 is self powered from 120 VAC power. With the integrated power supply the RAP-1 can also power most ozone monitors. This means you only need one wire between the ozone monitor and RAP-1 with only one power cable between the 2 devices. Set-up, and install are a snap.
Below is a List of compatible ozone monitors:
- ATI A14/A11
- ATI F12 (with relay option)
- ATI D12 (with relay option)
- ATI C12-17 (with relay option)
- ATI D12-IR (with relay option)
- Aeroqual SM-50
- Aeroqual SM-70
- Aeroqual S-300
- Aeroqual S-500
- Aeroqual S-900
- Aeroqual S-930
- Aeroqual S-940
- EcoSensors C-30ZX
- EcoSensors OS-4
- EcoSensors OS-6
- EcoSensors OEM-1
- EcoSensors OEM-2
- EcoSensors UV-100
Could i get electrical drawings of RAP-1 alarm panels