Oxidation Technologies will custom build a wide variety of specialized ozone applications. In the 9 months I have been working here, few projects have been the same. We have designed and built specialized pilot systems for customers exploring the new applications for ozone in their industry. We’ve produced a variety of systems for sanitation in the food industry and organic food storage. Our systems are solving tough problems in the pet products industry, and pharmaceutical research. We design systems for applications from bottled water treatment & dairy operations to municipal water, groundwater remediation, and sewage treatment. Our systems are helping customers in the ocean well drilling as well as the airline industry. We have designed custom treatment chambers for laboratories, allergy treatment, and product treatment. We’ve done in-house materials testing on a variety of dry and liquid materials. We continue to develop precise and safe control systems. Oxidation Technologies support the whole spectrum of ozone as well as other gas use with analyzers, sensors, parts and supplies. We have worked with customers all around the world. Everyone here works hard to understand needs and develop systems that will meet those needs. The leadership here have a tenacious spirit for overcoming obstacles and refuse to give up. The phones here are always in use providing excellent customer service. We are willing to travel and visit sites when needed or on a routine maintenance basis. From design to build, every project is steeped in cost consciousness, quality, the best materials and equipment for the job. Systems are built to work well, and last for a long time. After nine months working here, I continue to grow in my appreciation for the amazing potential of ozone, the depth of expertise laying the foundation of Oxidation Technologies, and the integrity and enthusiasm for applying the power of ozone to meet customers’ needs. At the same time, I have come to realize that what I have seen so far is only the tip of the iceberg. I am confident that the culture of growth and learning here will nourish my growth in understanding ozone and our ability to harness the power of ozone for your needs.
Recently Oxidation Tech updated our calibration chamber and process. We have been using a smaller chamber or individual processes to calibrate each sensor we receive one by one. With our new calibration chamber, we can calibrate as many as 10-15 ozone monitors at one time.
This calibration chamber still uses our Thermo Fischer Transfer Standard Ozone Analyzer to measure and control ozone levels inside the chamber. However, with the use of an external ozone generator and automated control system a precise ozone level can be maintained inside the chamber at all times. This saves time and potentially provides a higher quality, more accurate calibration for your device.
Our ozone calibration chamber can also be used to high range calibrations up to 1,000 ppm, or can be used for ozone exposure testing. As this sealed chamber has great capacity and automation any device a customer may need to be exposed to ozone can be placed in the chamber to be exposed to known and tightly controlled ozone levels.
We also offer ozone exposure testing for higher range ozone levels, and lower range ozone levels in a smaller chamber. Ozone exposure chambers are also a part of our standard product line as these are a popular requirement for many material testing facilities.
Calibrating ozone sensors is unlike calibration of many other common gas sensors. Ozone cannot be stored and must be produced on site. This eliminates the possibility of buying calibration gas for your ozone sensor.
We now offer a solution to this common challenge. We offer the ATI A23-14 Ozone Calibration kit as a rental by the week or month.
- Pre-payment required for all rentals – payment can be made via credit card online
- Rental period is for term paid for, shipping time to and from customers location is not included in rental term and is not billed
- Shipping both to and from the customer is paid by the customer – Ground shipping is okay
- Equipment gauranteed to arrive in working order, any damge to equipment will be billed to customer
- Rental term can be extended at any time during the rental
- Discounts for longer term rentals apply, arrangements must be made up front
Compatible ozone sensors:
- C16 PortaSense
- F12 Ozone Transmitter
- D12 Ozone Transmitter
- A14/A11 Ozone Detector
- Series-200 with EOZ sensor head
- Series-300 with EOZ sensor head
- Series-500 with EOZ sensor head
We can provide the calibration kit or adapter necessary for each of the sensors listed above. Be sure to ask us for these parts if you do not have them yourselves, we will ship with the A23-14.
Don’t see your sensor on the list? Call or e-mail us, we will do our best to accomodate your needs.
The A23-14 ships in a handy carry case with all the equipment you need for ozone sensor calibrations. A calibrated amount of ozone is produced and flows to your sensor for calibration purposes. We check the ozone output of the A23 each time we ship this device to ensure the best ozone accuracy for your application.