Oxidation Technologies will custom build a wide variety of specialized ozone applications. In the 9 months I have been working here, few projects have been the same. We have designed and built specialized pilot systems for customers exploring the new applications for ozone in their industry. We’ve produced a variety of systems for sanitation in the food industry and organic food storage. Our systems are solving tough problems in the pet products industry, and pharmaceutical research. We design systems for applications from bottled water treatment & dairy operations to municipal water, groundwater remediation, and sewage treatment. Our systems are helping customers in the ocean well drilling as well as the airline industry. We have designed custom treatment chambers for laboratories, allergy treatment, and product treatment. We’ve done in-house materials testing on a variety of dry and liquid materials. We continue to develop precise and safe control systems. Oxidation Technologies support the whole spectrum of ozone as well as other gas use with analyzers, sensors, parts and supplies. We have worked with customers all around the world. Everyone here works hard to understand needs and develop systems that will meet those needs. The leadership here have a tenacious spirit for overcoming obstacles and refuse to give up. The phones here are always in use providing excellent customer service. We are willing to travel and visit sites when needed or on a routine maintenance basis. From design to build, every project is steeped in cost consciousness, quality, the best materials and equipment for the job. Systems are built to work well, and last for a long time. After nine months working here, I continue to grow in my appreciation for the amazing potential of ozone, the depth of expertise laying the foundation of Oxidation Technologies, and the integrity and enthusiasm for applying the power of ozone to meet customers’ needs. At the same time, I have come to realize that what I have seen so far is only the tip of the iceberg. I am confident that the culture of growth and learning here will nourish my growth in understanding ozone and our ability to harness the power of ozone for your needs.
Oxidation Technologies is proud to present the UV-HCR ozone analyzer. This ozone analyzer offers high concentration ozone measurement (% by weight or g/m3) in a low cost package.
Traditionally measuring the output of an ozone generator was prohibitively expensive due to the cost of the ozone analyzer used for the job. Oxidation Tech has found a way to reduce the cost to the consumer by greater than 50% while still offering a high quality, accurate, and reliable device.
The UV-HCR is a new poly enclosure NEMA rated for harsh environments. A large datalogging display with external output is provided to measure ozone levels. The heart of this device is a refurbished Teledyne M452 Ozone Analyzer. The M452 is an OEM produce commonly used in the semiconductor industry to measure the output of an ozone generator. They offer no display and no easy to use function for zero or other function. We have added those functions, along with the required power supply and scaling to make this a user friendly device. There is a steady supply of high quality, barely used M452 Ozone Analyzers available to us. We can obtain these, refurbish and calibrate as needed, install in our enclosure and supply to the customer for less than 50% of a comparable device like the M454 Ozone Analzyer.
Optional flowmeter, ozone destruct unit, and data-logger allow the UV-HCR to compare with much higher end products, and allow the use of an ozone analyzer where it was previosly cost prohbitive.
Our last post gave information on how to measure output of your industrial ozone generator. The most important tool in this process is the high concentration UV ozone analyzer. We offer 4 different versions of a high concentration UV based analyzer that can complete this task. We will outline the differences in these units here.
The M454 is available in either g/m3 or % by weight units. Ranges from 25 g/m3 – 400 g/m3 and 5% – 25%. This is a compact analyzer that is very easy to use and extremely reliable for long term operation. The M454 also offers a 4-20 mA or 0-5 VDC output, and connection via RS-232 with some rudimentary data-logging capabilities. However, we prefer to use the 0-5 VDC output and an external data-logger.
The best feature of the M454 is the fast response. The M454 has no delay and no delayed response in ozone level output, all ozone readings are real time allowing you to understand the operation of your system in real time.
The UV-106H is produced by 2B Technologies. This unit has user settable ranges in g/m3 or % by weight. No need to order specific units, they can all be user set for the range you require. Ranges up to 400 g/m3 or 25% by weight are possible.
The UV-106H comes in a handy bench-mount design or wall mount NEMA cabinet.
The UV-106H offers a 4-20 mA output along with 0-2.5 VDC output as standard equipment. Also available are RS-232 and USB connections. On-board data-logging is fairly useful and user friendly.
Very handy user interface and great deal of options built into a compact chassis make this a great ozone analyzer.
Our only reason for not choosing this analyzer as our favorite is the 2-second sample time. The output updates every 2-seconds, giving a delay in any ozone output readings. If this does not affect your specific application, the UV-106H is a great choice.
The high end of UV based ozone analyzers is the M465H. This analyzer is available with every range listed above, and in Nema or rack mounted enclosures.
The M465H offers the greatest number of options and features of any analyzer we offer along with the greatest accuracy and precision. If you are looking for the absolute best in high concentration ozone measurement the M465H is the best choice you can make.
Integrated relay outputs, user settable ranges and operation, user friendly operation, and class leading accuracy of 0.5%. All these features and the reliability of a Teledyne analyzer make the M465H the best option for long term operation.
The M452 uses the same processor and shares features with the M454 ozone analyzer. The M452 is an OEM version of the 454 without a display and in a compact design. For OEM applications where the 0-5 VDC or RS-232 interface can be used, the M452 is a great choice.
Should you have any unanswered questions about which unit is right for you, or if you simply have questions about using an ozone measuring device, please give us a call. We would love to help. Ozone is our passion and we want to share our knowledge with you!
We also rent an older API Teledyne ozone analyzer, the 460H. This is the older version of the M465. We prefer the 460H due to the compact size and easy interface. While they are no longer in production, you can rent ours for your short term needs.
We also offer used ozone analyzers for sale. Check our used ozone equipment page to see if we have anything to meet your needs.