SS2 Diffuser
Sintered Stainless Steel Ozone Diffuser. Bubbles ozone into water at flow rates up to 10 LPM.  Fine pore bubble diffuser rated at 5 micron. Diffuser area is 2 1/2" long x 3/4" in diameter.
- Buy 5 for $24.00 each and save 20%
- Buy 10 for $20.00 each and save 33%
Sintered Stainless Steel Diffuser is an excellent choice for transferring ozone gas into water via bubble diffusion. 5-micron rating creates tiny bubbles across the entire length of the diffuser. Stainless Steel construction (316L stainless steel food grade) is both safe to use, and provides excellent durability and longevity.
1/4" Barbed connection provides solid seal when used with smaller 1/4" ID Teflon Tubing. Diffuser size is 2 1/2" long x 3/4" diameter.
Our testing has shown that small bubbles are created at low and high flow-rates with the SS2. There is no compromise on excellent mass transfer when using the SS2 at any flow-rate.
Common Applications:
-Water treatment
-Ozonated olive oil
-Ozone gas diffusion
Additional Information
Dissolve Ozone with Bubble Diffusers |
Compare Diffuser to Venturi Injector |
Fundamentals of Ozone Solubility |
Ozone Dosage vs Dissolved |
Online Ozone Calculations |
Ozone Solubility Basics
|
Manufacturer | Oxidation Technologies |
---|---|
Quickbooks Stock Level | 76.000000 |
Call For Price | No |
Material of construction | Stainless Steel |
Flow Rates | 10 LPM |
Nominal Gas Flow Rate | 0 - 10 LPM |
Operating Pressure | 1 - 125 PSI |
Max Pressure | 125 PSI |
Gas Connections | 1/4" Barbed |
Dimensions (LxWxH) | 2 1/2" x 3/4" |
Operational Temperature Range | 0-100 deg C |
Power Requirements | none |
Lead Time | in stock |
Warranty | 1 Year |
Country of Origin | USA |
Length x Diameter | 2 1/2" x 3/4" |
Micron Rating | 5 |
Max Water Flow Rate | 10 LPM |