Fluorine Informaiton
Fluorine:
|
Other Names |
|
|
Chemical Formula |
F2 |
|
CAS Number |
7782-41-4 |
|
Industry Uses |
Steel-making; Pharmaceuticals; Chemistry Laboratories |
|
Health Risks |
Irritation of eyes, skin, and mucous membranes; Chemical burns; Death |
|
Vapor Pressure |
760 mmHg at 85 K |
|
Water Solubility |
Reacts with water |
|
Flammability |
Non-Flammable but Strong Oxidizer |
|
Odor |
Pungent, sharp, choking |
What is Fluorine:
Fluorine is a non-metallic diatomic gas that is a trace element. It is a toxic, pale-yellow gas and is extremely reactive. Reactions of fluorine with alkali metals cause explosions. Fluorite, the primary mineral source of fluorine, is used extensively in steel-making. Many pharmaceuticals contain fluorine. Fluorine reacts with water and is corrosive to most common materials. It is an oxidizer and will react enough with most combustible materials to cause ignition. Under prolonged exposure to fire or heat, containers of fluorine may rupture and rocket.
Fluorine Exposure and Health Risks:
Fluorine is toxic and deadly by inhalation and skin absorption. Low concentrations will cause chemical burns. Chronic absorption can cause osteosclerosis and calcification of ligaments. As an oxidizer, fluorine provides great danger if it should ignite, causing a fire. It can also cause damage in occurrence of explosion.
Regulations:
The table below summarizes the most-recent exposure limits.
|
Limit/Level |
Type |
Organization |
|
1.7 ppm |
AEGL-1 (8 hrs) |
EPA |
|
2.3 ppm |
AEGL-2 (8 hrs) |
EPA |
|
36 ppm |
AEGL-3 (10 min) |
EPA |
|
5.7 ppm |
AEGL-3 (8 hrs) |
EPA |
|
0.1 ppm |
TWA (8 hrs) |
NIOSH |
|
0.1 ppm |
TWA |
OSHA |
Measuring Fluorine:
Fluorine concentration in the air can be measured in units of parts per million (ppm). We carry portable and fixed Fluorine monitors and kits, and all of our Fluorine products can be viewed HERE.
What type of component are you looking for?
| Fixed Mount | Handheld | Dissolved Kits: | Replacement Sensors: | Calibration Gas: | Rentals: |
 |
 |
 |
 |
 |
 |
All sensors require a yearly calibration to ensure your gas measurements are accurate and performing within manufacturer standards. This page is desiccated to the individual manufacturers we represent and their specific calibration procedures.
**Calibration Service Request Form **
|
Calibration costs do vary, see below to get an estimate: Calibration Fee: $150 Analyzer Calibration Fee: $300 PM Calibration Sensor Fee: $330 Genie Calibration Fee: $265 ATI Calibration Fee: $205 ** note that prices are subject to change per labor and parts required. |
Contact us for help choosing the right monitor for your application
