ATF-8
8 SCFH oxygen production at 25 PSI is produced by an ATF-8 oxygen concentrator module.
- SKU
- ATF-8
Related Products
Description / ATF-8
ATF Oxygen Modules incorporate proven pressure swing adsorption (PSA) principles into a unique patented design, which allows these systems to be compact, efficient, rugged, and lower in cost. ATF modules offer unparalleled design flexibility and enable applications where on-site/on-board oxygen generation was previously impractical.
A patented single rotary distribution valve built into the ATF module continually rotates at low speed by a small motor. The valve is maintenance-free, self-cleaning, insensitive to contamination, and invulnerable to wear. It directs the flow of compressed air to a group of four sieve beds (adsorption), while another four beds are purged into the atmosphere through the valve (desorption). The remaining four of the twelve beds are interconnected through the valve to equalize pressure as the sieve beds sequentially transition between adsorption and desorption. The small amplitutde pressure swings generated by the twelve sieve beds eliminate loud noise pulses, eliminate the need for a pressure regulator, and reduce compressor wear.
Features:
-Reliable Oxygen Production
-Environmentally Tolerant
-Constant Pneumatic Impedance
-Constant Delivery Pressure
-Easily Integrated
Product Characteristics:
|
Input Air Requirements: Flow Pressure |
65 LPM (2.3 SCFM) 25 PSI (172 kPa) |
|
Performance Data: Product Flow Oxygen Delivery Pressure |
3.8 LPM (8 SCFH) 9 PSI (62 kPa) |
| Product Concentration | 90-95% |
| Product Dew Point | -100°F (-73°C) |
| Dimensions (DxH) |
8 x 13 inches 21 x 32 cm |
| Weight | 9.6 lbs (4.4 kg) |
|
Physical Connections Compressed Air Inlet Product Gas Outlet |
1/2" ID tubing 1/4" ID tubing |
| Ambient Operating Conditions |
Locate the oxygen concentrator system in a well-ventilated area that is protected from weather elements. Inside room or enclosure: Temps should remain between 40°F (4°C) and 130°F (54°C) In storage: Temps should remain between 0°F (-18°C) and 140°F (60°C) |
| Control Power Requirements (Single Phase) | 120 V / 208-240 V ~ ± 10%, 50 / 60 Hz, 0.025 A or 208-240 V ~ ± 10%, 50 Hz, 0.025A |
| Typical Power Consumption | 3 W |
| Gear Motor | 7398 (FMR 1268) / 7383 |
| Compressed Air Input Requirements | Clean Air (oil-less). Max Temp of 170°F (77°C). Performance Rated at 120°F (49°C). |
| Mounting |
Two Integral Mounting Pads Provided. Toe Clamps (Optional) Vertical Mounting Preferred. Must Be Isolated From Compressor Vibration. |
| Sequal Part Number |
1265V , 7465V |
Typical Applications:
Medical
-Anesthesia
-Oxygen Therapy
-Veterinary Medicine
Manufacturing
-Brazing/Sodering
-Glass Work/Blowing
Environmental
-Ozone (Generator) Feed Gas
-Environmental Remediation
Additional
-Fish Farming
-Cosmetic
What is Pressure Swing Adsorption (PSA)
Clean, dry compressed air is fed into the first molecular sieve bed. Nitrogen is adsorbed, while oxygen is allowed to flow through. When the sieve in the first bed becomes full of nitrogen, the airflow is then directed into the second bed. As the second bed separates the oxygen from the nitrogen, the first bed vents its nitrogen into the atmosphere. Compressed air is once again fed into the first bed, and the process is repeated continuously. A constant flow of oxygen is reliably produced.
Downloads:
More Information
| Manufacturer | Air Sep |
|---|---|
| Listing Description | 8 SCFH @ 25 PSI |
| Internal Compressor | No |
| O2 Delivery PSI | 9 PSI |
| Nominal Gas Flow Rate | 8 SCFH |
| Operating Pressure | 25 PSI |
| Gas Connections | 1/4" ID tubing |
| Dimensions (LxWxH) | 11" wide x 11" deep x 16" tall |
| Operational RH Range | NA |
| Operational Temperature Range | NA |
| Power Requirements | 120 V / 208-240 V ~ ±10%, 50/60 Hz, 0.025 A or 208-240 V ~ ±10%, 50 Hz, 0.025 A |
| Lead Time | In Stock |
| Warranty | 1 Year |
| Country of Origin | USA |
| Oxygen Production | 8 SCFH |
| Description | Requires 2.3 CFM air @ 25 PSI |