DC PRO 200

This has been discontinued and replaced with the DC Pro 450

200 mg/hr ozone generator.

Part Number: DC-PRO-200

2 week lead time
SKU
DC-PRO-200

Description / DC PRO 200

The new DC PRO 200 is one of the handiest ozone generators available today. It works in the car, in the house, the cottage, hotel room, boat, it can even work on a battery pack. The uses for this ozone generator are endless. The DC PRO is a medium-sized ozone generator designed for use in a room or building up to approx. 750 sq/ft for freshening the air, or shock treating up to about a 100 sq/ft area. (Please Note: Ozone is not capable of penetrating solid matter, i.e., walls. Ozone levels for particular square footages are assuming that there are not walls, doors, etc., that would prevent the ozone from traveling efficiently). This unit does have a variable control for adjusting the output. The output starts at approx. 10 mg/hr and goes up to 200 mg/hr.

The DC PRO 200 is a top-of-the-line ozone generator for both recreational and industrial purposes. Corona discharge is used for the ozone generation, this unit also does not require a feed gas which helps to maximize the generator's usability.

Applications:

     -Shock treating smaller sized rooms (attack odors at their source)

     -Room sterilization

     -Odor removal

        -Car odor

        -Cigarette/Cigar smoke smells

        -Pet odors

     -Protein decomposition

     -Water/Fire damage remediations

     -Air purification

 

DC PRO 200 vs. Ionizers:

There is a lot of confusion when it comes to the benefits of using an ozone generator for air purification/disinfection vs. the use of an ionizer with the same end-goal in mind. The big thing to remember is that ionizers do not have the capacity to actually disinfect spaces/surfaces. Ionizers essentially work be electrically “sticking” viruses and bacteria to surfaces. This is done by magnetic electrical waves the ionizers create. In the short-term, the ionizers may seem like they are working because of the smell fresh that is created. However, in the long-run, they can cause a film of bacteria, dust, etc., to develop to on surfaces because nothing is being destroyed. Ozone (O3), on the other hand, actually kills (oxidizes) the room and destroys odor sources before converting back into oxygen (O2).

 

Specifications:

Generation Method Corona discharge utilizing mica plate technology
Supply Gas Ambient Air
Maximum Ozone Output 200 mg/hr
Controls On/Off Rocket Switch - fully variable control for ozone output
Dimensions (HxWxL) 2.75" x 6" x 5.25"
Fan Size 16 CFM
Construction Stainless Steel

 

Downloadable Content:

     -DC PRO 200 Manual

More Information

Quickbooks Stock Level 0.000000
Manufacturer Oxidation Technologies
Dimensions (LxWxH) 2.75" x 6" x 5.25"
Warranty 1 Year
Ozone Output

200 mg/hr

Unit Features

- Great for odor removal, room sterilization, fire damage remediations and more

- Adjustable ozone output

We found other products you might like!

Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
DC PRO 450
$304.00
DC PRO 970
$408.00