Sintered Stainless Steel Ozone Diffuser. Bubble ozone into water at flow rates up to 5 LPM. Fine pore bubble diffuser rated at 5 micron. Diffuser area is 1" long x 1/2" in diameter.
- Buy 5 for $15.00 each and save 21%
- Buy 10 for $12.50 each and save 34%
Sintered Stainless Steel Diffuser is an excellent choice for transferring ozone gas into water via bubble diffusion. 5-micron rating creates tiny bubbles across the entire length of the diffuser. Stainless Steel construction is both safe to use, and provides excellent durability and longevity.
1/4" Barbed connection provides solid seal when used with smaller 1/4" ID Teflon Tubing. Diffuser size is 1" long x 1/2" diameter.
Our testing has shown that small bubbles are created at low and high flow-rates with the SS1. There is no compromise on excellent mass transfer when using the SS1 at any flow-rate up to 5 LPM
- Water treatment
- Ozonated olive oil
- Ozone gas diffusion
Watch Video below to see the SS1 diffuser in action. Flow rate is increased slowly from 1 LPM to 10 LPM to show how the bubble size remains very small throughout the flow range. Great bubble diffuser for a wide variety of applications without the concern of contaminating your water with ceramic or other materials that will remain in your water.
|Call For Price||No|
|Nominal Gas Flow Rate||0 - 5 LPM|
|Operating Pressure||1 - 125 PSI|
|Max Pressure||125 PSI|
|Gas Connections||1/4" barbed connection|
|Dimensions||1" long x 1/2" diameter|
|Operational Temperature Range||0 - 100 deg C|
|Lead Time||in stock|
|Country of Origin||USA|