SS1 Diffuser

Sintered Stainless Steel Ozone Diffuser.  Bubble ozone into water at flow rates up to 5 LPM.  Fine pore bubble diffuser rated at 5 micron.  Diffuser area is 1" long x 1/2" in diameter.

$19.00
86 In Stock
  • Buy 5 for $15.00 each and save 21%
  • Buy 10 for $12.50 each and save 34%

Sintered Stainless Steel Diffuser is an excellent choice for transferring ozone gas into water via bubble diffusion.  5-micron rating creates tiny bubbles across the entire length of the diffuser.  Stainless Steel construction (316L stainless steel food grade) is both safe to use, and provides excellent durability and longevity.

 

1/4" Barbed connection provides solid seal when used with smaller 1/4" ID Teflon Tubing.  Diffuser size is 1" long x 1/2" diameter.

Our testing has shown that small bubbles are created at low and high flow-rates with the SS1.  There is no compromise on excellent mass transfer when using the SS1 at any flow-rate up to 5 LPM

 
Common Applications:

     -Water treatment

     -Ozonated olive oil

     -Ozone gas diffusion

Watch the video below to see the SS1 diffuser in action.  Flow rate is increased slowly from 1 LPM to 10 LPM to show how the bubble size remains very small throughout the flow range.  Great bubble diffuser for a wide variety of applications without the concern of contaminating your water with ceramic or other materials that will remain in your water.

 

 

 

Additional Information

Dissolve Ozone with Bubble Diffusers

Dissolve ozone with bubble diffusers

Compare Diffuser to Venturi Injector

Bubble Diffuser

Venturi Injector

Fundamentals of Ozone Solubility

Fundementals of ozone solubility

 

Ozone Dosage vs Dissolved

Ozone dosage vs dissolved

 

Online Ozone Calculations

Online ozone calculations

 

Ozone Solubility Basics

 

 

More Information
Manufacturer Oxidation Technologies
Quickbooks Stock Level 86.000000
Call For Price No
Material of construction Stainless Steel
Nominal Gas Flow Rate 0 - 5 LPM
Operating Pressure 1 - 125 PSI
Max Pressure 125 PSI
Gas Connections 1/4" Barbed
Dimensions (LxWxH) 1" x 1/2"
Operational Temperature Range 0 - 100 deg C
Power Requirements none
Lead Time in stock
Warranty 1 Year
Country of Origin USA
Length x Diameter 1" x 1/2"
Micron Rating 5
Max Water Flow Rate 5 LPM
Write Your Own Review
You're reviewing:SS1 Diffuser
We found other products you might like!
Loading...