Dissolve ozone in water with bubble diffusers
Ozone gas can be dissolved into liquid with simple bubble diffusers, similar to what is commonly used in the bottom of a fish aquarium for […]
Dissolve ozone in water with bubble diffusers Read More »
Ozone Products
Ozone Dosage vs Dissolved Ozone
Ozone dosage = the amount of ozone applied to the water Dissolved ozone = the amount of ozone measured in the water Ozone dosage into
Ozone Dosage vs Dissolved Ozone Read More »
Measuring Dissolved Ozone in Chloronated Water
Is there a way to measure dissolved ozone (0.5 to 3.0 ppm) in water with a high chlorine level. Yes, there is a way to
Measuring Dissolved Ozone in Chloronated Water Read More »
MAX-Series Oxygen concentrators
We have recently started selling the MAX-Series of oxygen concentrators. This is a great addition to our oxygen concentrator line-up. We believe these units are
MAX-Series Oxygen concentrators Read More »
D16 PortaSens ozone sensor resolution
resolution of the D16 portasens monitor
D16 PortaSens ozone sensor resolution Read More »
How to Measure Dissolved Ozone Using the I-2019 Digital Handheld Meter
These are the steps:
1. Turn on the I-2019 meter by pressing the ON/OFF button. The O3 symbol will appear on the screen.
2. Place the zeroing ampoule in the meter’s sample port.
3. Place the light shield over the zeroing ampoule.
4. Press ZERO/TEST button. The O3 symbol will flash for 8 seconds, after which the screen readout will read 0.0.0.
…
How to Measure Dissolved Ozone Using the I-2019 Digital Handheld Meter Read More »
Resolution of D16 PortaSens III Portable Detector with Ozone 00-1009 Sensor
The resolution of the D16 PortaSens sensor 00-1009 is 0.1 ppm ozone at any range from 0-5 ppm up to 0-49.9 ppm ozone. The resolution of the readout on the screen is 1 ppm ozone when set at the range of 0-50 ppm up to 0-200 ppm.
Resolution of D16 PortaSens III Portable Detector with Ozone 00-1009 Sensor Read More »
How to Wire OS-6 Ozone Monitor to Remote Alarm Panel for O3 Safety Monitoring
The EcoSensors OS-6 Ozone Monitor has a safety control relay built in that is set to activate above the ozone human safety limit of 0.1 ppm. When this relay is wired to the Remote Alarm Panel (RAP-1), a loud audible alarm and flashing light will activate when ozone levels go above 0.1 ppm.
How to Wire OS-6 Ozone Monitor to Remote Alarm Panel for O3 Safety Monitoring Read More »
Ambient Air Ozone Scrubber
New Product! Destroy ozone safely in ambient air with the CDA-250 catalytic ozone scrubber. Catalytic ozone scrubber destroys ozone in ambient air at an air
Ambient Air Ozone Scrubber Read More »
Ozone air disinfection
Ozone is a very effective disinfectant and is effective against all viruses and bacteria. Ozone operates according the principle of oxidation. Ozone (O3) is instable
Ozone air disinfection Read More »