The Flash Reactor 75-NK is a unique mixing chamber that is designed to promote rapid dissolution of ozone into water. It uses a combination of redirection and shearing to ensure that the ozone and water are thoroughly mixed, resulting in high mass transfer efficiency with minimal contact time.
The Flash Reactor 75-NK is ideal for a wide range of ozone applications, including:
- Water disinfection
- Wastewater treatment
- Food and beverage processing
- Industrial applications
The Flash Reactor 75-NK is made of natural PVDF, which is highly resistant to ozone and other chemicals. It is also designed to operate over a wide range of pressures and water flows.
Here are some of the benefits of using a Flash Reactor 75-NK:
- High mass transfer efficiency: The Flash Reactor 75-NK ensures that the ozone and water are thoroughly mixed, resulting in high mass transfer efficiency. This means that more ozone is dissolved into the water, resulting in better disinfection and treatment.
- Minimal contact time: The Flash Reactor 75-NK achieves rapid dissolution of ozone into water, which means that minimal contact time is required. This is important for applications where ozone is used to disinfect drinking water, as it reduces the amount of time that the water needs to be in contact with ozone before it is safe to drink.
- Wide range of operating pressures and water flows: The Flash Reactor 75-NK is designed to operate over a wide range of pressures and water flows, making it suitable for a variety of applications.
- Ozone and chemical resistance: The Flash Reactor 75-NK is made of natural PVDF, which is highly resistant to ozone and other chemicals. This makes it a durable and long-lasting solution for ozone applications.
If you are looking for a powerful and versatile ozone mixing chamber, the Flash Reactor 75-NK is a great option to consider.
How to size a Flash Reactor 75-NK
To size a Flash Reactor 75-NK, you will need to consider the following factors:
- Water flow rate
- Ozone flow rate
- Differential pressure
The Flash Reactor 75-NK is designed for water flow rates of 8.5 to 11 GPM. The ozone flow rate should be determined based on the specific application. The differential pressure is the difference in pressure between the inlet and outlet of the Flash Reactor. It should be at least 10 PSI.
If you are unsure how to size a Flash Reactor 75-NK for your specific application, please contact an application engineer for assistance. Our Flash Reactors can be found here: https://www.oxidationtech.com/products/accessories/ozone-injection/flash-reactor.html