The Single Head OC-3 Pump is designed for safely and efficiently compressing ozone gas in a wide variety of applications. With its durable construction and ozone-compatible materials, this pump provides dependable performance in both laboratory and field environments.
Built with either 316 stainless steel or aluminum heads, and equipped with all Teflon diaphragms, the OC-3 Pump is engineered to withstand exposure to ozone at any concentration. This makes it a versatile and trusted choice for applications that require pressurization or transfer of ozone gas.
Product Details
Capacity
- Eccentric: 0.250
Wetted Materials
- Head: Aluminum or 316 Stainless Steel
- Diaphragm: 3-Ply Teflon
Motor
- Type: General Purpose
- Voltage: 115V
- Frequency/Phase: 60 Hz, Single Phase
Things to Consider
- Heat & Ozone Concentration
Heat degrades ozone. Since compressors generate heat during operation, ozone concentration will decrease slightly during compression. To compensate, a higher ozone production rate may be required. - Vacuum & Pressure Loads
If the compressor is both pulling vacuum and creating pressure, both forces must be factored into selecting the correct unit. - Material Selection
- Aluminum Heads: Suitable only with oxygen-fed ozone generators. Using aluminum with air-fed ozone generators risks corrosion. However, aluminum dissipates less heat, conserving ozone better during compression.
- Stainless Steel Heads: Highly resistant to corrosion, making them the preferred option for air-fed ozone systems.
- Pressure Boosting
If the compressor is used to boost pressures (e.g., from 10 PSI at the generator outlet up to 50 PSI at the final outlet), this must be accounted for when reviewing performance charts. - Restart Under Pressure
The OC-Series can restart under pressure, but with limitations. Contact us for application-specific guidance.
Common Applications
The OC-3 ozone compressor is used in many scenarios where ozone must be pulled, boosted, or pushed into a system:
- Pull ozone gas from an ozone generator and air dryer that operate under vacuum
- Boost low ozone pressures for lab or small-scale testing applications
- Push ozone gas into a pressurized water line when a venturi injector is not an option (common in home water systems)
- Inject ozone into a wastewater force-main at a lift station to control odor and corrosion
Application Examples
1. Vacuum-Driven Air-Fed Ozone Generator
One of the most common uses of the OC-3 Pump is to pull ozone gas from an air-fed ozone generator operating under vacuum. The gas can be dried with a vacuum-driven air dryer, then compressed and delivered to the point of use. This method reduces capital costs compared to high-pressure ozone systems and offers flexibility in setup.
2. Wastewater Force-Mains
Force-mains in wastewater systems often operate at high pressures, sometimes above 50 PSI. The OC-3 Pump can boost ozone pressure to levels sufficient for injection into these systems, helping reduce odors, lower chemical usage, and minimize corrosion from hydrogen sulfide (H₂S).
Conclusion
The Single Head OC-3 Pump is a robust, versatile, and ozone-compatible compressor ideal for applications ranging from laboratory testing to full-scale wastewater treatment. With its stainless steel or aluminum head options, Teflon diaphragms, and reliable motor, it ensures long-lasting performance in demanding ozone environments.
Whether you need to boost ozone pressure, overcome system backpressure, or transport ozone gas safely, the OC-3 Pump provides an efficient and dependable solution.
You can find this product here: https://www.oxidationtech.com/oc-3.html