phone Contact Us

Ozone Applications

Aircraft Water Disinfection AOP Agri-Food Processing Air Treatment Ammonia Removal From Water Aquaculture Aquatic Life Support Systems Beef (Red Meat) Processing with Ozone Biological Oxygen Demand Bottled Water Cannabis Car Wash Water Reclaim Systems Case Studies Case Studies: Force Main Treatment Case Study: Enhancing Fish Processing with Ozone Technology in Georgetown, Guyana Case Study: Ozone Water Disinfection System for Major U.S. Airline Case Study: Spice Warehouse Ozone Installation Chemical Oxygen Demand (COD) Removal with Ozone Clean In Place (CIP) Concrete Cooling Tower Cyanobacteria and Toxin Removal with Ozone Dairy Farms Drinking Water E.coli O157:H7 Reduction with Ozone Flour Milling Force Main Treatment Grain Treatment Groundwater Remediation Hydroponic Greenhouses Lake Remediation Laundry Listeria Inactivation with Ozone Machine Coolant Tanks Municipal Water Treatment NOx removal with Ozone Nanobubbles Odor Control with Ozone Odor Removal Oxidize Tannins from Water with Ozone Ozonated Ice & Fish Storage Ozone Applications in Mining Industry Ozone Regulations in Food Processing Ozone Regulations in Organic Food Production Ozone for Mold Elimination Ozone in Air Applications Ozone in Seafood Processing Ozone use for Post-Harvest Processing of Berries Ozone use in Wet Scrubbers Ozone-Biofiltration Plastic Adhesion Pool & Spa Pork Processing with Ozone Resolution Concerning the Use of Ozone in Food Processing Shellfish Depuration Surface Sanitation Ultra-Pure Water Vertical Farming with Ozone Waste Water Treatment Water Re-use Water Treatment Well Water Treatment

How to read a Venturi Injector performance Chart

How to read a Venturi Injector Performance Chart:

The Mazzei Venturi Injector is incredibly predictable and reliable in the performance of liquid flow and gas suction. Using the performance chart provided by Mazzei allows for accurate planning and engineering of your ozone system. However, a proper understanding of this performance chart is necessary.

Mazzei Venturi Injector for ozone

Image of a Venturi Injector: Water flows from left to right; ozone is introduced into the middle.

 

Below is a chart for a common venturi injector. The injector is capable of mixing both liquid and gas into the main water flow through the venturi injector. For the purpose of dissolving ozone gas into water, the 3rd and 4th columns can be ignored completely as these refer to liquid suction only.

Venturi injector in action

The first column is the injector inlet pressure, which is the pressure provided to the venturi injector inlet. The 2nd column is the injector outlet pressure, which is the pressure exerted on the injector outlet from delivering the water to the point of use. The 3rd column called MOTIVE FLOW states the flow rate of water going through the injector based on inlet/outlet pressures. This is what allows the proper pump to be chosen, calculate gas to liquid ratios, and more. The last column called AIR SUCTION lists the amount of gas (oxygen, ozone, air), that can be sucked into the water stream at these aligned injector inlet/outlet pressures. As can be seen from the chart, as injector outlet pressure (2) increases, injector suction decreases (4). This is true even though the motive flow (3) stays relatively constant.

 

Columns:

1. Injector inlet How to read a Venturi Injector performance chartpressure – water pressure at the inlet of the venturi injector, can be measured with a pressure gauge at the inlet of the venturi injector

 

2. Injector outlet pressure – water pressure at the outlet of the venturi injector, can be measured with a pressure gauge at the outlet of the venturi injector

 

3. Motive water flow – Indicates the actual water flow that will flow through the venturi based on inlet/outlet pressures as measured.

 

4. Air Suction – Indicates the ozone/oxygen/air gas suction created by the venturi based on inlet/outlet pressures as measured.

 

 

Example:

A pump delivering 18 GPM @ 15 PSI can inject a maximum of 20 SCFH of ozone gas if 7 PSI of injector outlet pressure exists.

 

If more suction is needed two options exist: Increase the size of the pump or decrease injector outlet pressure by increasing the diameter of the pipe, reducing the number of elbows or lowering the height the delivered water.

 

View our full line of Venturi Injectors HERE

 

 

Additional Information Links:

Ozone Generator Buyers Guide

Ozone FAQ's

Ozone Dosage vs Dissolved Ozone

Dissolve Ozone into water with Bubble Diffuser

Dissolve Ozone into water with Venturi Injector

Dissolve ozone into water with Static Mixer

Compare Venturi Injector and Bubble Diffusers

How to read an Injector Performance Chart

Additional Ozone Solubility Information