We recently had a customer contact us in need of an ozone destruct unit. This particular customer runs a company where they sell ozonated water out of their store. The process to ozonate and disinfect the water was taking place in a backroom in the store. Because of the high foot traffic in the store with customers and employees constantly going into and leaving the store, it was important that ambient ozone levels remained low. The problem was that too much ozone was leaking out into the air, creating an environment that had the possibility to become unsafe. When one of our ozone specialists spoke with the customer on the phone, they had figured a CDA destruct unit would be the best option, considering it would be able to circulate the ambient air and destroy any ozone that may be present. However, our technician thought that a different route may be best. After some time going over the dilemma, our ozone specialist recommended a custom CDU-300 ozone destruct device. This decision was reached because it would be best to destroy the ozone in the tank where it was being used to ozonate the water, instead of waiting for the ozone to leak from the tanks before trying to destroy it. The final product is this CDU-300 (seen below) with a blower assembly to destroy ozone at the source, and not allow it to get into the ambient air. This just goes to show how speaking with an ozone expert can help you get the optimal product that will best fit your specific applications.
To see our full line of ozone destruct devices, Please Click Here.