Ozone Safety Audible Visual Alarm

Ozone alarm in use, audible and visual

Remote Audible Alarm Panel (RAP-1) is Activated by OS-6 Monitor Relay when Ozone is above 0.1 PPM

RAP-1 Audible and Visual Alarm Activates when Ozone Levels are above 0.1 PPM

In this video the RAP-1, which is a remote audible / visual alarm, is wired to the safety relay switch in the OS-6 Ozone Monitor, which is set to trigger above a 0.1 ppm ozone level. According to OSHA, the exposure limit for workers is 0.1 ppm for 8 hours per day. This relay is permanently programmed to always activate above 0.1 ppm ozone levels.

The decibel levels on the RAP-1 range from 92-103 dBA. The volume can be adjusted by turning the little black dial on the RAP-1 (shown in the video). The RAP-1 light and audible alarm are activated the entire time the OS-6 reads above 0.1 ppm ozone. As the ozone levels drop, the readings drop and result in the flashing light and audible alarm stopping after the reading goes below 0.1 ppm ozone.

Both devices can be purchased through our website. Each product is linked to below:

The RAP-1 Remote Audible Alarm Panel can be purchased here:
https://www.oxidationtech.com/rap-1.html

The OS-6 Ozone Monitor can be purchased here:
https://www.oxidationtech.com/products/ozone-monitors/fixed-ozone-monitor/os6-ozone-monitor.html



Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top