The Single Head OC-1 Ozone Compressor is a compact, durable solution for safely pressurizing ozone gas in a variety of industrial, environmental, and water treatment applications. Designed with chemically resistant materials and available in both aluminum and 316 stainless steel head configurations, the OC-1 pump ensures consistent performance—even when working with high concentrations of ozone.
Whether you’re boosting ozone pressure for injection into water lines or pulling gas through an air dryer and generator, the OC-1 offers the power and flexibility needed for demanding ozone systems.
Key Features and Specifications
Capacity & Motor:
- Eccentric Capacity: 0.222
- Motor Type: TEFC (Totally Enclosed Fan Cooled)
- Motor Size: 1/3 HP
- Voltage: 115V
- Frequency/Phase: 60 Hz, Single Phase
Wetted Materials:
- Head Options: Aluminum or 316 Stainless Steel
- Diaphragm: 3-ply Teflon — ideal for withstanding ozone’s aggressive nature
Application Considerations
- Ozone Degradation by Heat
Heat is the enemy of ozone. Since compressors generate heat during operation, some ozone loss is inevitable. Plan for slightly higher ozone production to compensate for thermal degradation during compression. - Pressure and Vacuum Effects
When using the OC-1 to pull a vacuum or boost pressure, both sides of the pressure equation must be considered. For example, drawing ozone from a vacuum source and boosting to a higher pressure outlet requires careful sizing to maintain flow and efficiency. - Material Compatibility
- Aluminum Head: Recommended only with oxygen-fed ozone systems. Aluminum corrodes when exposed to ozone produced from air. However, it dissipates heat faster, conserving ozone more effectively during compression.
- Stainless Steel Head: Provides superior chemical resistance for air-fed ozone systems and long-term durability.
- Pressure Boosting Applications
If you’re boosting from low pressure (e.g., 10 PSI) to high pressure (e.g., 50 PSI), consult the compressor’s performance chart to ensure compatibility with your specific setup. - Restarting Under Pressure
The OC-Series compressors can restart under load, though limitations exist. Contact us for details on your specific application.
Common OC-1 Applications
- Pulling Ozone Gas
From a vacuum-driven ozone generator and air dryer—reducing system cost while maintaining flexibility. - Boosting Ozone Pressure
In lab or pilot-scale testing setups where ozone must be stored or injected into a pressurized system. - Injecting Ozone into Pressurized Water Systems
When a venturi injector is not feasible, the OC-1 pump can provide the pressure needed to deliver ozone into the water line. - Force-Main Injection in Wastewater Systems
Ozone is highly effective for reducing odors, lowering chemical usage, and minimizing corrosion caused by hydrogen sulfide (H₂S) in pressurized force-mains. The OC-1 can boost ozone to the required system pressures (often exceeding 50 PSI).
Example Use Case:
Vacuum-Driven Ozone Generator + OC-1 Compressor
A vacuum-driven ozone generator produces ozone from dry air, pulled through an air dryer. The OC-1 then pressurizes the ozone gas for delivery to its final destination—be it a water system, contact chamber, or storage tank. This setup lowers capital costs and is a flexible alternative to higher-pressure ozone systems.
Summary
The OC-1 Single Head Ozone Compressor is an essential tool for anyone needing to safely and reliably pressurize ozone gas. Its robust construction, ozone-compatible materials, and versatile operation make it a go-to choice for both small- and large-scale ozone applications.
You can find this product here: https://www.oxidationtech.com/oc-1.html