Single Head OC-P1

The OC-P1 compressor is a low-cost option to pump ozone gas or provide higher pressures of ozone gas.

$600.00
4 In Stock

The OC-P1 compressor is a low-cost option for pumping ozone gas or providing higher pressures of ozone gas for your application.

The OC-P1 is a piston-driven compressor using a stainless steel head PTFE seals and Anodized aluminum parts.  

This compressor is ideal for applications where ozone concentrations are not high, ozone gas streams are low and pressures above 30 PSI are not required. 

 

Features:

  • Thin-walled, Hard Coated Anodized Cylinder
  • Oil-less, Non-lube PTFE Piston Seal
  • Permanently Lubricated Ball Bearings
  • UL Recognized Motor & Thermal Protector
  • Balanced Eccentric/Connecting Rod Assembly
  • Epoxy E-Coated Wetted Components
  • Stainless Steel Valves, Retainers and Screws
  • Die Cast Aluminum Components
  • Efficient 4.4” Diameter Motor
  • Oversized Front Mounted 9-Blade Fan
  • Arc Formed Valves (Optional)

 

Compressor Limitations:

This compressor is a lower-cost option than our diaphragm compressors. This compressors uses a piston rather than a diaphragm.  The piston action with a PTFE sealing ring will wear and allow ozone to leak past much quicker than a diaphragm compressor.  Therefore, consider the following limitations and suggestions prior to implementing in to your application.

  • Limit output pressure to 30 PSI continuous to prevent leaking ozone gas from the piston
  • Limit ozone concentrations to below 5% by weight if used continuously, or 10% by weight intermittent
  • Dry ozone gas with a dew point of -40 deg F or lower should be used

 

Comparison Chart: 

Model Number OC-P1
Head Configuration Pressure/Vacuum
Free Air Flow 0.37 SCFM
Max Continuous Pressure 70 PSIG
Max Intermittent Pressure 100 PSIG
Max Restart Pressure 100 PSIG
Max Ambient Air Temp 104° F
Min Ambient Air Temp 50° F
Motor Voltage/Frequency 115V/60Hz
Motor Type Shaded Pole
Current at Rated Load 3.8 Amps
Power at Rated Load 190 Watts
Starting Current 5.2 Amps
Min Full Load Speed 1610 RPM
Thermal Protector Yes
Net Weight 6.6 lb

 

OC-P1 Drawing: 

OC-P1 Chart: 

 

Additional Information:

OC-P1 Brochure

 

More Information
Manufacturer Oxidation Technologies
Quickbooks Stock Level 4.000000
Call For Price No
Material of construction Stainless Steel
Flow Rates

8.4 LPM @ 25 PSI

6 LPM @ 50 PSI

Max Pressure 70 PSIG
Gas Connections 2X 1/4-18 NTP
Dimensions (LxWxH) 5X6X6
Operational Temperature Range 104 F
Warranty 1 Year
Write Your Own Review
You're reviewing:Single Head OC-P1
Loading...