Workhorse Profile-15

*PLEASE NOTE: This product has been discontinued. If your're looking for an alternative, we highly recommend the MAX-8.*

 

15 SCFH oxygen production at 7 PSI is produced by a Workhorse-15 Profile oxygen concentrator module.

Call For Price

*PLEASE NOTE: This product has been discontinued. If your're looking for an alternative, we highly recommend the MAX-8.*

 

The Workhorse-15 Profile Oxygen System offers the same superior performance of the standard Workhorse model, but in less space. Workhorse-15 technology can be offered as a replacement for older, existing systems where space considerations are important. Workhorse utilizes Advanced Technology Fractionator (ATF). 

ATF Oxygen Modules incorporate proven pressure swing adsorption (PSA) principles into a unique patented design, which allows these systems to be compact, efficient, rugged, and lower in cost. ATF modules offer unparalled design flexibility and enable applications where on-site/on-board oxygen generation was previously impractical. 

Features

Reliable Oxygen Production

Environmentally Tolerant

Compact and Lightweight

Constant Delivery Pressure

Low Operating Cost

Eliminates Need for External Product Tank

Optional Oxygen Concentration Monitor 

Product Characteristics

Performance Data:

Product Flow

Oxygen Delivery Pressure

 

15 SCFH

7 PSI (48 kPa)

Product Concentration Up to 95%
Product Dew Point -100°F (-73°C)
Dimensions (DxH)

17 x 11 x 22 inches

43 x 28 x 56 cm

Weight 67 lbs (30 kg); Additional 1 lb. with optional oxygen monitor

Physical Connections

Product Gas Outlet

 

1/8" FNTP

Ambient Operating Conditions 

Locate the oxygen concentrator system in a well-ventilated area that is protected from weather elements.

Inside room or enclosure: Temps should remain between 40°F (4°C) and 130°F (54°C) 

In storage: Temps should remain between 0°F (-18°C) and 140°F (60°C)

Control Power Requirements (Single Phase) 120 V  ~ Â± 10%, 60 Hz or 208-240 V ~ Â± 10%, 60 Hz or 220-240 V ~ Â± 10%, 50 Hz
Typical Power Consumption ~450 W

Typical Applications

Manufacturing

  • Jewelry/Brazing/Sodering
  • Glas Work/Blowing

Environmental

  • Ozone (Generator) Feed Gas
  • Environmental Remediation
  • Waste/Water Treatment

Additional

  • Fish Farming
  • Cosmetic

What is Pressure Swing Adsorption (PSA)

Clean, dry compressed air is fed into the first molecular sieve bed.  Nitrogen is adsorbed, while oxygen is allowed to flow through.  When the sieve in the first bed becomes full of nitrogen, the airflow is then directed into the second bed.  As the second bed separates the oxygen from the nitrogen, the first bed vents its nitrogen into the atmosphere.  Compressed air is once again fed into the first bed, and the process is repeated continuously.  A constant flow of oxygen is reliably produced.

PSA oxygen generator description


 Downloads:

Workhorse Specifications

More Information
Manufacturer Air Sep
Call For Price No
Listing Description 15 SCFH @ 7 PSI
Oxygen Production 15 SCFH
Internal Compressor Yes
O2 Delivery PSI 9 PSI
Nominal Gas Flow Rate 15 SCFH
Operating Pressure 7 PSI
Max Pressure 9 PSI
Gas Connections 1/8" Female NPT
Dimensions (LxWxH) 17" wide x 11" deep x 22" tall
Operational RH Range NA
Operational Temperature Range NA
Power Requirements 120 V ~ ±10%, 60 Hz or 208 – 240 V ~ ±10%, 60 Hz or 220 – 240 V ~ ±10%, 50 Hz
Lead Time In Stock
Warranty 1 Year
Country of Origin USA
Description Turnkey unit with built-in compressor
Write Your Own Review
You're reviewing:Workhorse Profile-15
We found other products you might like!
Loading...