The TOX-20 Oxygen Generator is designed to deliver a dependable oxygen supply for demanding applications. With an output of 20 SCFH oxygen flow at up to 20 PSI continuous pressure, the TOX-20 comes as a complete package—equipped with air filtration, an air dryer, regulators, and a built-in compressor. Whether you need a long-lasting oxygen source for medical, industrial, or specialized use, the TOX-20 provides the reliability and efficiency you can count on.
Dependable Performance
The TOX-20 is engineered to run for thousands of hours of continuous service. With only one valving action and very few moving parts, the design minimizes failure points and maximizes reliability. The oxygen generator uses zeolite sieve material, securely sealed in aluminum cylinders, to adsorb nitrogen. These sieve beds are durable and rarely require replacement, ensuring consistent oxygen purity.
Fully Rebuildable Design
Unlike many oxygen generators that must be replaced once components wear out, the TOX-20 is completely rebuildable. Sieve beds can be replaced, and valves can be cleaned or swapped out, allowing you to extend the unit’s service life indefinitely. With all replacement parts in stock and readily available, you can maintain your TOX-20 for years, making it a truly sustainable solution.
Economical Operation
Because the TOX-20 can be rebuilt instead of replaced, it provides significant cost savings over time. Competing models often require full replacement when zeolite or key parts wear down. By contrast, the TOX-20’s long-term rebuildability makes it one of the most economical oxygen generators on the market.
Built in the USA
Proudly manufactured, assembled, and tested in the USA, the TOX-20 meets rigorous quality standards for performance and durability.
Internal Air Compressor
The TOX-20 comes standard with an internal 1/3 hp oil-less compressor that provides the compressed air required for oxygen production. With a rebuild interval of around 8,000 hours, this compressor is reliable and built for extended service.
The integrated system also includes:
- Air coolers to reduce heat from compressed air.
- Two-stage filtration with moisture drains to remove impurities and condensation.
By filtering and drying the compressed air, the TOX-20 ensures higher oxygen purity and longer oxygen module life—especially important in humid environments. This robust internal air management system is unique to the TOX-Series, offering advantages not found in competitor models.
Note: In environments above 95°F or where standing water is present, additional moisture removal measures should be considered.
External Air Compressor Option
For facilities with a central compressed air system, the TOX-20 can be configured to run on an external compressed air source. Supplying 4 CFM at 50 PSI (or higher) allows the unit to operate efficiently while reducing power consumption and maintenance. Using plant air can be a cost-effective long-term solution, as it eliminates the need for smaller built-in compressors that require separate upkeep.
Oxygen Pressure Boost Option
Supplying oxygen to hard shell hyperbaric chambers often requires more pressure than standard concentrators can provide. While typical 10 LPM concentrators may be rated up to 20 PSI, their flow rate often drops off under real-world conditions.
The Oxygen Pressure Boost option solves this issue by using a properly sized boost compressor. This allows existing oxygen concentrators to reliably deliver oxygen to hyperbaric chambers, even against back pressure from the chamber and check valves. With included DISS fittings, this booster is designed specifically for hyperbaric applications.
Why Choose the TOX-20?
- Reliable: Thousands of hours of continuous oxygen production.
- Rebuildable: Extend service life with replaceable parts.
- Economical: Lower long-term costs compared to non-rebuildable models.
- Complete Package: Built-in compressor, air cooling, and filtration system.
- Made in the USA: Quality assurance and local support.
- Flexible Options: Internal compressor, external air supply, and oxygen boost solutions.
The TOX-20 Oxygen Generator is more than just an oxygen supply system—it’s a dependable, long-term investment. Whether you need continuous oxygen for industrial, medical, or hyperbaric use, the TOX-20 offers unmatched flexibility, efficiency, and value.
You can find this product here: https://www.oxidationtech.com/tox-20.html