ATI C21 Dri-GAS Sampling System
Related Products
Description / ATI C21 Dri-GAS Sampling System
How it Works
The ATI Model C21 Gas Sampling System uses an integrated sample pump to draw gas from the process and remove excess moisture before delivering it to a remote gas transmitter such as the ATI F12. By conditioning the sample and preventing condensation, the C21 helps protect the sensor and ensure accurate, reliable gas measurements in challenging environments.
Features
- Condensing Water Vapor Removed Continuously
- Samples from ducts under vacuum
- Gas Sensor “Blinding” Eliminated
- Virtually Maintenance Free
- Options for 120 VAC or 230 VAC Operation
The Dri-Gas sampling system draws gas samples from high-humidity vent stacks, ducts, wet wells, or other humid locations. The system removes water vapor from the gas sample by contact with a cold plate that condenses moisture and delivers a dehumidified gas sample suitable for toxic and combustible gas monitoring equipment. Excess condensate is pumped to a drain fitting on the bottom of the enclosure and can be collected if necessary.
Applications
- Environmental Monitoring
- Wastewater Treatment
- Drinking Water Treatment
- Industrial Wastewater
Parameters
*Maintenance should be done every 6 months
Manuals:
C21 Sampling System Dimensions
More Information
| Manufacturer | ATI |
|---|---|
| Features | The C21 Dri-Gas Sampling System removes water vapor from a gas stream using a cold plate to condense the vapor and deliver a dry sample. |
| Sample Flow Rate | Adjustable, 300 - 800 cc/min., 500 cc./minute recommended |
| Range | 300-800cc/min. |
| Dimensions (LxWxH) | 15” W x 17” H x 9” D (380 x 430 x 200 mm) |
| Warranty | 1 Year |
| Description | ATI C21 Dri-GAS Sampling System |