Dissolved Ozone SAM Kit
Measure ozone 0-0.75 ppm and has a digital LED readout
The I-2022 Dissolved Ozone Meter is designed for accurately and quickly measuring ozone in water levels from 0 - 0.75 ppm. This device uses the Indigo Method for testing. This method is based on the colorization of dye by ozone, where the loss of color is directly proportional to the ozone concentration. The results are then displayed on the monitor in ppm (mg/L) of ozone present.
This device has LED display for precise and accurate readout and is easy to use. Once the I-2022 has been purchased the cost per test is only $1.02.
- SAM Photometer (I-2022)
- K-7433 Ozone Vacu-vials
- A blank/zero ampoule
- 25 mL sample cup
- 4 AAA batteries for operation
- Screwdriver for installing/replacing batteries
- Instruction manual
- Carrying case to hold device & accessories
How to use:
Before beginning the test, the I-2001 must be set to zero. Press the power key to turn on the device. The display will show "O3". Insert the ZERO ampule supplied with the Vacu-vials kit flat end first into the sample cell compartment. Place the light shield over the ZERO ampoule and press the zero/test key. The "O3" symbol will flash for approximately 8 seconds, then the display will show "0.0.0". Follow the test procedure in the Chlorine Vacu-vials kit also shown below.
More CHEMetrics Kits for Ozone
|K7404||DPD||0.025ppm||0-0.6 & 0.6-3ppm|
|Call For Price||No|
|4-20 mA Output||No|
|Power Requirements||4 AAA Batteries|