Aeroqual Carbon Monoxide (CO) Sensor Head 0-25 ppm (ECM)

Carbon Monoxide (CO) sensor head whose Gas Sensitive Electrochemical (GSE) technology will measure Carbon Monoxide from 0-25 ppm with a 0.01 ppm resolution providing <± 10 accuracy (for CO levels between 5-25 ppm) or <± 0.5 ppm (for CO levels between 0-5 ppm).

This head uses an active sensor technology with an internal fan to pull air across the GSE sensor at a specific flow rate for accurate gas detection. This fan will pull a fresh gas stream across the GSE sensor every 60 seconds for accurate Carbon Monoxide detection.

This sensor head will be a direct fit onto any Series-200, Series-300, or Series-500 Aeroqual ozone monitor.  This head can be purchased as an addition to your existing monitor, or with a new base unit.  To purchase with a base unit see our Aeroqual ozone monitor page.  If you currently have an Aeroqual ozone monitor this sensor will be a direct fit for your current monitor.  The Series-200, Series-300, or Series-500 will automatically detect this as a 0-25 ppm GSE Carbon Monoxide head and react accordingly.

 View a brochure with specifications on the Series-200, 300, and 500.

Detailed Sensor Specifications for Aeroqual ambient sensors

Click on image to expand

Sensor Type:

There are two types of Aeroqual sensors, type 1 and type 2. 
The type 1 is used with the S-200, S-300, S-500, and S-900 monitors. 
The type 2 is calibrated specifically with fittings on the end allowing it to be used with the ENC enclosure and in the S930

Full list of technical information and specifications for all Aeroqual sensors

Carbon Monoxide Information