# Ozone Generator output calculator g/m3

Calculate ozone output from LPM and g/m3 ozone concentration)

 LPM g/m3 g/hr

((LPM x 60) x 0.001) x g/m3 = g/hr

This calculation works the same regardless of feed-gas type (air or oxygen) as a mass (grams) is used in the calculation, therefore it is a direct calculation.

To convert ozone concentration in air to another unit of measure use the calculator below:

Ozone Concentration in air by weight

 g/m3 O3 ppm O3 %

100 g/m3 = 7.8% O3

1% = 12.8 g/m3 O3

1% = 7,284 ppm O3

This calculator is used for converting ozone concentration units when ozone is measured in air. For oxygen use the calculaotor below.

To convert ozone concentration in oxygen to another unit of measure use the calculator below:

Ozone Concentration in oxygen by weight

 g/m3 O3 ppm O3 %

100 g/m3 = 6.99% O3

1% = 14.3 g/m3 O3

1% = 6,520 ppm O3

This calculaotr is used for converting ozone concentration units when ozone is measured in oxygen. For air, use the calcultaor above.

Ozone properties listed in table below for reference:

Ozone Properties

 Density of ozone = 2.14 kg/m3 Molecular weight of ozone = 48 Density of oxygen = 1.43 kg/m3 Molecular weight of oxygen = 32 Density of air = 1.29 kg/m3 Density of water = 1,000 kg/m3

-Ozone Dosage Rate Calculator HERE

-Calculate ozone generator output from g/m3 ozone concentration

-Calculate ozone generator output from % by weight ozone concentration

-Calculator to convert common ozone concentration units

-Ozone output units conversion calculator

-Calculator to convert common flow measurements

-Calculate flow in a pressurized flow-meter

-Other common units of measure HERE

-Other common ozone calculations HERE

we enjoy discussing ozone applications and hope to help you find success in every ozone installation. 